Maintenance of screw extrusion system of spiral wound pipe machine
Publish Time: 2022-05-09 Origin: Site
Spiral wound pipe machine is a high-tech composite pipe product of our company with independent intellectual property rights, world-leading level, green environmental protection, energy-saving, and consumption reduction. The spiral wound pipe machine is mainly used as a buried drainage pipe. It combines the rigidity of the steel belt with the corrosion resistance, low friction, and wear resistance of polyethylene. The screw extrusion system of the spiral wound plastic pipe machine adopts daily maintenance and regular maintenance for maintenance. Next, let's take a look at it in detail. Here are some answers.
Here is the content list:
l Daily maintenance of screw extrusion system of spiral wound pipe machine.
l Regular maintenance of the screw extrusion system of the spiral wound pipe machine.
Daily maintenance of screw extrusion system of spiral wound pipe machine.
Daily maintenance is routine work that doesn't take up instrumentality operational hours and is sometimes completed throughout the start-up. The focus is to clean the spiral wound pipe machine, lubricate the moving parts, tighten the threaded parts that are easy to loosen, and check and adjust the motors, control instruments, working parts, and pipelines in time. If an abnormal sound occurs during the operation of the HDPE spiral tank, it should be stopped immediately for inspection or repair. Strictly stop metal or alternative rubbish from falling into the hopper to avoid harm to the screw and barrel. to stop iron rubbish from coming into the barrel, a magnetic absorption part or a magnetic frame is often put in at the fabric body of water of the barrel to stop rubbish from falling into the barrel. The fabric should be screened earlier. Additionally, concentrate on the clean production setting, and don't let garbage and impurities combine into the fabric to dam the filter plate, which can have an effect on the output and quality of the merchandise and increase the resistance of the machine head.
Regular maintenance of the screw extrusion system of the spiral wound pipe machine.
Regular maintenance is usually carried out after the spiral wound pipe machine has been continuously operated for 2500 to 5000 hours and then shut down. The machine has to be disassembled for review, mensuration, and identification of the wear and tear of the most elements, replacement of elements that have reached the required wear limit, and repair of broken elements. When the spiral wound pipe machine needs to be stopped for a long time, the screw, barrel, head, and other working surfaces should be coated with anti-rust grease. The small screw should be suspended in the air or placed in a special wooden box, and be leveled with wooden blocks to prevent the screw from deforming or bumping. Regularly calibrate the temperature control instrument to check the correctness of its adjustment and the sensitivity of control. Additionally, it's necessary to designate an individual to be chargeable for the upkeep of spiral wound HDPE pipe machine instrumentality and to incorporate an in-depth record of every maintenance and repair state of affairs within the manufactory instrumentality management file.
Our official website is https://www.krahpipe.net/. If you are engaged in work related to spiral-wound pipe machines or want to know more about our company, you can communicate with us on the website. We'll wholeheartedly give users a lot of and higher services with high-quality merchandise, smart services, and competitive prices!